Skip to main content

Laredo HD/T

The all-terrain commercial tire for hard-to-reach job sites and tough weather conditions.
Serious on- and off-road traction.

Aggressive tread design

Helps conquer the winter elements.

Studable tire with RMA Severe Snow Traction rating

Offers durability and reliability on- and off-road.

DuraShield® construction

WHAT ARE PEOPLE SAYING

"First off, I was impressed by the overall wide range of performance that these tires offered. I can say that I have put these through the test! OH, and did I forget to say that I manage a salvage yard! Thats right. From heavy to mud to highway to whatever! These tires DO IT! I drive on average 35,000 miles per year and WOW! On a load rated E! WOW! All's I can say is DON'T CHANGE A THING!!!!! THANK YOU!!!!!!!"

- Zachariah 

WARRANTY

Winter Tires
Winter tires are specifically designed to offer optimal levels of traction on ice, snow, and slush in addition to wet and dry road surfaces in severe cold weather conditions. Winter tires are not intended for year round usage. All winter tires exhibit the Three Peak Mountain Snow Flake marking indicating suitability for winter application.
Standard Limited Warranty
All Uniroyal® tires have a Standard Manufacturer's Limited Warranty, which covers defects in workmanship and materials for the life of the original usable tread, or for 6 years from date of purchase, whichever occurs first.

All sizes accept #16 stud pins.

Government UTQG Ratings do not apply to light truck sized tires.

>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.

>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.

>> Tread patterns are often tuned to accomodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph.

WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.

DANGER: Never mount a 16" diameter tire on a 16.5" rim.

Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.